Mini auto relay T78, 15.7*12.3*14mm starter relay, Fuel pump relay
Description:
Relay is an electromagnetic device which is used to isolate two
circuits electrically and connect them magnetically. They are very
useful devices and allow one circuit to switch another one while
they are completely separate. They are often used to interface an
electronic circuit (working at a low voltage) to an electrical
circuit which works at very high voltage. For example, a relay can
make a 5V DC battery circuit to switch a 230V AC mains circuit.
Thus a small sensor circuit can drive, say, a fan or an electric
bulb.
What do SPST,SPDT,DPST and DPDT mean?
SP and DP refer to single pole and double pole, ST and DT refer to
single throw and double throw.
Pole refers to the number of circuits controlled by the switch:SP
switches control only one electrical circuit. DP switches control
two independent circuits(and act like two identical switches that
are mechanically linked). Don't confuse "pole" with "terminal". The
DPST switch, for example, has four terminals, but it is a DP, not a
4P switch.
Throw refers to the extreme position of the actuator: ST switches
close a circuit at only one position. The other position of the
handle is OFF. DT switches close a circuit in the UP position, as
well as the Down position(ON-ON). A DT switch can also have a
center position(frequently ON-OFF-ON).
Single pole/throw and double pole/throw switches are by far the
most common switches, but tripe and quadruple configurations are
also available. They are commonly denoted 3PST,3PDT,4PDT, etc.
Applications:
Suitable for household electrical appliances, automation system,
electronic equipment, instrument, meter, telecommunication
facilities and remote control facilities.
General data:
| Contact form | 1A(1H)-SPST NO 1B-SPST NC 1C(1Z)-SPDT |
| Insulation resistance | 100MΩMin at500VDC |
| Dielectric strength between open contacts | 500VAC 50-60HZ(1 minute) |
| Dielectric strength between contacts and coil | 500VAC 50-60HZ(1 minute) |
| Operate time | 10ms max. |
| Release time | 5ms max. |
| Ambient temperature | -40°C ~ +85°C |
| Shock resistance-Malfuction | 10G |
| Shock resistance-Destruction | 100G |
| Vibration resistance | 10-55Hz,1.5mm double amplitude |
| Ambient humidity | 40-85% RH |
| Weight | Approx 6g |
| Safety standard | UL |
Coil data (@20°C)
Rated voltage (VDC) | Coil Resistance Ω(±10%) | Max Operate Voltage (VDC) | Min Release Voltage (VDC) | Max Applied Voltage (VDC) |
| 0.6W | 0.8W |
| 6 | 60 | 45 | 3.9 | 0.6 | 7.8 |
| 9 | 135 | 101 | 5.85 | 0.9 | 11.7 |
| 12 | 240 | 180 | 7.8 | 1.2 | 15.6 |
| 24 | 960 | 720 | 15.6 | 2.4 | 31.2 |
Outline dimension(mm):
PCB board layout and Wiring diagram:
