6*6mm waterproof tactile switch with copper pin, height from 4.3 ~ 31mm

Description:

• Different heights are available

• Design 6*6mm

• Solder terminals

Tact switch is an on/off electronic switch that is only on when the button is pressed or if there is a definitive change in pressure. Another way to consider it, as momentary make or brake switch. As soon as a tact switches button is released, the circuit is broken.

You can choose between gold or silver contact material and you can choose from multiple cap options for certain models.

Application:

We offer multiple sizes, operating forces, actuator heights, and life cycles to meet the needs of your application. Our tact switches are used for human interface applications where the user applies force to the push button momentary switch for selection and control. Include telecommunications, consumer electronics, audio/visual, medical device, testing/instrumentation, computer peripherals and more.

Unique selling proposition:

• Reliable tactile feedback on input
• Simple assembly
• Long life time

Mechanical data:

Soldering data:

Item	Test condition	Performance
Cold test	1.Temperature:-30±2 ℃ 2.Duration of test: 96h 3.Take off a drop water 4.Standard conditions after test: 1h	Contact resistance 200mΩ max. Shall be satisfied
Heat test	1.Temperature: 80±2 ℃ 2.Duration of test: 96h 3.Standard conditions after test: 1h	Contact resistance 200mΩ max. Shall be satisfied
Temperature cycle	1.Test cycle: 5 cycles 2.Standard confition after test:1h	Contact resistance 200mΩ max. Shall be satisfied
Humidity test	1.Temperature: 60±2 ℃ 2.Relative humidity: 90-95% 3.Duration of test: 96h 4.Take off a drop water 5.Standard conditions after test:1h	Contact resistance 200mΩ max. Shall be satisfied
Salt mist	The switch shall be subjected to a fime mist f salt solution at a temperature of 35±2 ℃ for 24h continuously(salt solution concentration 5±1% by weight)	Without excessive rust. Contact resistance 200mΩ max
Endurance(switching) action	1.D.C.12V 50mA resistance load 2.Operation speed: 2-3 times/sec. 3.Push force: Maximum value operation force 4.Operation number: 50,000 times	Contact resistance 200mΩ max. Bouncing: 10ms max. Variation rate of operation force shall be within ±30% to the value before testing
Withstand H2S	1.Density:3±1ppm 2.Temperature: 40±2 ℃ 3.Relative humidity: 90-95% 4.Duration of test: 24h 5.Standard condition after test: 1h	Contact resistance 200mΩ max. Shall be satisfied
Withstand SO2	1.Density:10±2ppm 2.Temperature: 40±2 ℃ 3.Relative humidity: 90-95% 4.Duration of test: 24h 5.Standard condition after test:1h	Contact resistance 200mΩ max. Shall be satisfied
Shock	Measure after test at a condition below peak acceleration---80G Test time-6 directions, each 3 times total 18 times	Contact resistance 200mΩ max. Shall be satisfied

ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery time, and free technical help.

We have our own carbon potentiometer factory, which is professional and has the ability to develop different kinds of potentiometers. We have our own trade mark and letter of patent for the structure.

We value every customer visit, which is a platform to show our profession and friendly. Because our corporate philosophy is to be a friend with you, not just business.

We attend professional electronic components exhibitions, which is most important to know the market trend, and gain the ability to help our clients expand their market and serve them better.

ANYO always pursuit of quality, not quantity. To ensure the quality, we only cooperate with qualified suppliers. Besides, our QC staff will control all shipments before loading.