Sign In | Join Free | My himfr.com
Home > Passive Electronic Components >

White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone

    Buy cheap White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone from wholesalers
     
    Buy cheap White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone from wholesalers
    • Buy cheap White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone from wholesalers
    • Buy cheap White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone from wholesalers

    White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone

    Ask Lasest Price
    Brand Name : ANYO
    Model Number : SD150
    Price : Negotiation
    Payment Terms : L/C, T/T
    Supply Ability : 10000pcs per day
    Delivery Time : 8-10 work days
    • Product Details
    • Company Profile

    White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone

    Passive SD150 telephone dynamic receiver for mobile phone, Φ38mm 150Ω

    Specifications:


    TypeDynamic receiver unit
    DimensionExternal diameter 38mm
    Sensitivity(S.P.L)93dB ±3dB at 1kHz 60mV with IEC 318 coupler
    Frequency responseRefer to frequency response chart
    Impedance150OHM ±20% at 1 KHz
    Magnet field intensityAxial - dB, Radial - dB at 1KHz
    Max. input powerMust be normal at a white noise, 50mW for 1 minute
    Weight35g±2g
    AppearanceShould not exist any obstacle to be harmful to normal operation: damages, cracks, rusts, and distortions, etc.
    Buzzer, rattle, etc.Should not be audible at 1V sine wave between 300Hz to 3.4KHz
    Terminal strengthCapable of withstanding 1KG load for 15 sec. without resulting in any damage or rejection
    Load test1mW white noise(-filter) is applied for 72 hours satisfy the tests listed on item 03,04,09 and 10

    Environmental test:


    Sensitivity difference shall be within ±3dB and should satisfy the listed on item 03,04,09 and 10, after each following test.


    Thermal cycle test

    Low temperature -40℃±3℃

    Temperature:+70℃±3℃

    Cycle: 6 hour/cycles each, and then keep 2 hours in a room.

    High temperature. testKeep 96 hours at +70℃±3℃ and leave 6 hours in normal temperature and then check.
    Low temperature testKeep 96 hours at -40℃±3℃ and leave 6 hours in normal temperature and then check.
    Humidity testKeep 96 hours at +40℃±3℃ and relative humidity 95% and leave 3 hours in normal temperature and then check.
    Drop testDrop the handset mounted a unit onto a board 5mm thick 18 times from the height of 1m and them should satisfy the test listed on item 09 and 10.


    Measurement condition:


    Test and measurement will be carried out under normal condition of temperature within 5℃ to 35℃, relative humidity within 45% to 85% and air pressure of 860mbar to 1060mbar.

    Should uncertainly arise in data obtained from the above atmosphere, control of temperature at 20℃±2℃ and relative humidity within 60% and 70%, with air pressure remaining unchanged, to be enforced.


    Test signal60mV
    Sweep freq.responseApply test signal varying logarithmical from 100Hz to 10KHz, 2 times for 0.5 second.
    S.P.L(Sensiticity)Read out average figure of S.P.L meter needle
    Freq. response curveApply test signal and check response curve with frequency response recorder.


    Dimension: (mm)


    Product Tags:

    smd chip resistor

      

    pir motion sensor

      
    Quality White Passive Electronic Components SD150 Dynamic Receiver Φ38mm 150Ω For Mobile Phone for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Ningbo Anyo Import & Export Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)