Rectifier diode KBPC610, single phase with molded plastic body
Description:
A Bridge rectifier is an Alternating Current (AC) to Direct Current
(DC) converter that rectifies mains AC input to DC output. Bridge
Rectifiers are widely used in power supplies that provide necessary
DC voltage for the electronic components or devices. They can be
constructed with four or more diodes or any other controlled solid
state switches.
Single-phase bridge rectifier is the most frequently-used circuit for electronic dc power
supplies. It requires four diodes but the transformer used is not
center-tapped and has a maximum voltage of VSM. The full-wave
bridge-rectifier is available in three distinct physics forms. The
single secondary winding is connected to one side of the diode
bridge network and the load to the other side.
The main advantage of this bridge circuit is that it does not
require a special centre tapped transformer, thereby reducing its
size and cost.
Features:
• The plastic package carries Underwriters Laboratory Flammability
Classification 94V-0
• Ideal for printed circuit boards
• Low reverse leakage
• High forward surge current capability
• High temperature soldering guaranteed: 260℃/10 seconds,at 5 lbs.
(2.3kg) tension
Mechanical data:
| Case | Molded plastic body |
| Terminals | Plated leads solderable per MIL-STD-750, Method 2026 |
| Polarity | Polarity symbols marked on case |
| Mounting | Through hole for #6 screw,5in.-lbs. torque max. |
| Weight | 0.13 ounce, 3.66 grams |
Application:
It is used in many electronic devices including laptop computers,
cellular phones and PDA's
Maximum ratings and electrical characteristics:
Rating at 25℃ ambient temperature unless otherwise specified.
Resistive or inductive load,60HZ.
For capacitive load, derate current by 20%
| Characteristics | Symbol | KBPC3510 | Unit |
| Maximum recurrent peak reverse voltage | VRRM | 1000 | V |
| Maximum RMS bridge input voltage | VRMS | 700 | V |
| Maximum DC blocking voltage | VDC | 1000 | V |
Maximum average forward rectified. @Ta=50℃ output current @ Ta=25℃ | I(AV) | 6.0 3.0 | A |
| Peak forward surage current 8.3ms single half sine-wave super
impossed on rated load(JEDEC method) | IFSM | 125 | A |
| Rating for fusing(t<8.3ms) | I2t | 64 | A2s |
| Maximum instantaneous forward voltage drop per bridge element at
3.0A | VF | 1.0 | V |
Maximum reverse current @Ta=25℃ at rated DC blocking voltage per element @Ta=100℃ | IR | 10.0 1.0 | uA |
| Typical junction capacitance | Cj | 60 | pF |
| Typical thermal resistance | RθJA | 8.0 | ℃/W |
| Operating junction temperature range | TJ | -55~125 | ℃ |
| Storage temperature range | TSTG | -55~150 | ℃ |
NOTES:
1. Unit mounted on 6.0” x 5.5” x0.11” thick(15x14x0.3cm)Al.plate.
2. Unit mounted on P.C. board with 0.47” x 0.47”(12x12mm) copper
pads,0.375”(9.5mm) lead length.
Dimension:(mm)
